Flat heat shrink tube sleeve tubing
Features/Benefits
Operating temperature range: -55℃~125℃
Minimum shrink temperature: 70℃
Minimum full recovery temperature: 110℃
Specifications/Standards
UL224 E214175 125℃ VW-1
SAE-AS81531, MIL-STD-202
Physical properties: Tensile strength 10.4MPa min.
Elongation 200% min.
Low temperature flexibility No cracking, Heat shock No cracking, dripping or flowing
Print performance:
UL224 50 rubs, legible
MIL-M-81531 50 rubs, legible
MIL-STD-202 30 strokes, legible
Electrical properties:
Dielectric voltage withstand 2.5kV, 60 sec No breakdown
Dielectric strength 19.7kV/mm min.
Volume resistivity 1014Ω·cm min.
Chemical properties:
Corrosion No corrosion
Flammability Average burn time is less than 1 minute
Fluid resistance: (23℃, 24 hrs) Followed by print performance tests of SAE-AS81531
Size (inch) | Inside diameter（mm/inch） | Recommended use range(mm/inch） | |
As supplied (min.) | After recovery (max.) | ||
3/32 | 2.4 (0.093) | 0.8 (0.031) | 0.9-2.0 (0.035-0.079) |
1/8 | 3.2 (0.125) | 1.0 (0.042) | 1.1-2.7 (0.044-0.105) |
3/16 | 4.8 (0.187) | 1.6 (0.062) | 1.8-4.1 (0.069-0.160) |
1/4 | 6.4 (0.250) | 2.1 (0.083) | 2.3-5.5 (0.091-0.215) |
3/8 | 9.5 (0.375) | 3.2 (0.125) | 3.5-8.0 (0.137-0.320) |
1/2 | 12.7 (0.500) | 4.2 (0.166) | 4.7-10.8 (0.183-0.425) |
3/4 | 19.1 (0.750) | 6.35 (0.250) | 7.0-16.3 (0.275-0.640) |
1 | 25.4 (1.000) | 8.5 (0.333) | 9.3-21.6 (0.366-0.850) |
1 1/2 | 38.1 (1.500) | 19.1 (0.750) | 21.0-33.0 (0.825-1.300) |
2 | 50.8 (2.000) | 25.4 (1.000) | 27.0-48.0 (1.063-1.890) |
