Custom Heat Shrink Tubing

Custom Heat Shrink Tubing

Custom heat shrink tubing 3:1 shrinking, semi-rigid, size from 8mm to 350mm UV resistant, superior water proof Adhesive lined heat shrink tubing Shrink Temperature: 120°C. Voltage Class 1kV Adhesive Lined Medium Wall Polyolefin Heat Shrink Tubing Application: KHA2-M provides excellent protection...

Product Details

Custom heat shrink tubing

3:1 shrinking, semi-rigid, size from 8mm to 350mm

UV resistant, superior water proof

Adhesive lined heat shrink tubing

Shrink Temperature: 120°C.

Voltage Class 1kV


Adhesive Lined Medium Wall Polyolefin Heat Shrink Tubing

1.jpg

 

Application:

KHA2-M provides excellent protection under harsh environmental conditions, thermally stabilized, modified Polyolefin Tubing, suitable for a variety of low voltage electrical and mechanical applications The shrink tubing has an adhesive to provide great water-proofing and environmental protection in many applications. The adhesive seals can be made over lead, steel, aluminum, copper, and other standard plastic and elastomeric insulating materials, logo can be printed on the tube specially, short pieces are available based on requirement.


Heat shrink tubing production photos:

2.jpg

 

How to use heat shrink tubing

1.Measure the diameter of the wire, and then choose a piece of heat shrink that will be large enough to slide onto the wire before heating but will still provide a snug fit once heated. The shrunken diameter should be slightly smaller than the wire's diameter to ensure a tight fit.

2. Measure a length of heat shrink tubing that is slightly longer than the damaged section of wire, most heat shrink tubing will also shrink longitudinally (around 5-15%), so be sure to give yourself enough tubing to cover the exposed area after heating.

3. Use a pair of scissors to cut the tubing to the appropriate length.

4. Slide the tubing onto the wire so that it covers the damaged/exposed section.

5. Use a heat gun to shrink the tubing.

Keep the heat gun moving back and forth along the length of tubing, as staying in one place can damage the wire,continue heating the tubing until it is tightly secured to the wire.


Inquiry