Basic Info
Model NO.: A-2NS
Type: Insulation Sleeve
Material: PE
Brand: Kehong Heat Shrink
Suitable for DIY Market:
Flannel Decorative Surface: Excellent Sweat Absorption
Trademark: KEHONG
Application: Insulators, Sports
Chemistry: Organic Insulation
Color: Black,Yellow,Red,Green,Blue
Shrink Ratio: 2:1
Termal Endurance: -55~110°c
Well Suited for The DIY Market: Increases Friction Ans Safety
Origin: Guangzhou China
Product Description
A-2NS Grip & Non Skid X-Pattern Textured Heat Shrink Tube
Ideal for use as grips on tennis rackets, badminton rackets,fishing rods, baseball bats,
billiard cue, hockey sticks and so on.
Size(mm) | As supplied(mm) | After recovery(mm) | Standard package | ||
ID | Average. Wall Thickness. | Max I.D. | Average. Wall Thickness. | ||
φ15 | ≥15 | 0.45±0.15 | 8 | 0.85±0.15 | 1.0 |
φ20 | ≥20 | 0.50±0.15 | 11 | 0.90±0.15 | 0.8/1.0/1.6 |
φ22 | ≥22 | 0.50±0.15 | 12.5 | 0.90±0.15 | 0.8/1.0/1.6 |
φ25 | ≥25 | 0.50±0.15 | 14.5 | 1.00±0.15 | 0.8/1.0/1.6 |
φ28 | ≥28 | 0.50±0.15 | 15.5 | 1.00±0.15 | 0.8/1.0/1.6 |
φ30 | ≥30 | 0.60±0.15 | 17.5 | 1.20±0.15 | 0.8/1.0/1.6 |
φ35 | ≥35 | 0.60±0.15 | 20.0 | 1.20±0.15 | 0.8/1.0/1.6 |
φ40 | ≥40 | 0.60±0.15 | 23.0 | 1.20±0.15 | 0.8/1.0/1.6 |
φ45 | ≥45 | 0.65±0.15 | 25.0 | 1.25±0.15 | 0.8/1.0/1.6 |
φ50 | ≥50 | 0.65±0.15 | 28.0 | 1.25±0.15 | 0.8/1.0/1.6 |
How do you install heat shrink tubing
Step 1. find a correct tubes with ID larger than the wire and cables OD. Step 2. cover the wire or cable by tubes, then heat the tube by heat gun, finally the tube will shrink to the cable closely.
How to measure heat shrink tubing
Tubes ID should be meassured by male gauge, we state a tube size means tube ID, but not tube's flat width.
How to use heat shrink tubing without a heat gun
Step 1. find a correct tubes with ID larger than the wire and cables OD. Step 2. cover the wire or cable by tubes, then heat the tube by hair dryer, ligher or heat oven, finally the tube will shrink to the cable closely.
