Implementation Standard Of ROHS 2.0 For Kehong Heat Shrinkage Pipe

- Dec 07, 2018-

In order to meet the environmental protection requirements of the market and customers, strengthen the quality control and process control of environmental protection materials, standardize the supply behavior, and ensure that all products, components or materials supplied to customers are ROHS 2.0 compliance requirements. Any losses caused by failing to meet the requirements of this standard are fully responsible by the supplier and corresponding. Compensation.

1. general provisions

The insulation bushing products such as heat shrinkable pipes mentioned in the ROHS 2.0 implementation standard ensure to meet the following requirements.

We guarantee that the environmental protection control indicators in our products are as follows:

Cadmium (Cd) content was less than 69 ppm.

The contents of B lead (Pb), mercury (Hg), hexavalent chromium (Cr (VI), polybrominated biphenyls (PBBs), polybrominated diphenyl ethers (PBDEs), dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), di (2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP) were less than 800 ppm.

C exemption material: lead content in copper alloy is less than 38000ppm;

2. specific provisions

All materials supplied meet the requirements of ROHS 2.0 (Amendment Directive EU 2015/863) and ensure that the following provisions are met:

2.1 During the sample recognition stage, the supplier should submit the test report of RoHS 2.0 (revised instruction EU 2015/863) third party (SGS or CTI) within the validity period (Chinese and English versions).

2.2 Third-party reports of different materials should include the following items:

A The third-party inspection report of plastic parts must include ten items: Pb, Cd, Hg, Cr6+, PBBs, PBDEs, DBP, BBP, DEHP and DIBP.

The third party inspection report of B metal parts must include ten items: Pb, Cd, Hg, Cr6+, PBBs, PBDEs, DBP, BBP, DEHP and DIBP.

C packaging materials must provide ten items of Pb, Cd, Hg, Cr6+, PBBs, PBDEs, DBP, BBP, DEHP and DIBP.

D All testing reports are valid for one year. If we need the supplier to provide the testing report temporarily, the supplier should cooperate actively.

For more information, please contact to






a 镉(Cd)含量小于69ppm;

 b 铅(Pb)、汞(Hg)、六价铬(Cr(VI))、多溴联苯(PBBs)、多溴二苯醚(PBDEs)、邻苯二甲酸二丁酯(DBP)、邻苯二甲酸丁苄酯(BBP)、邻苯二甲酸二(2-乙基己基)酯(DEHP)、邻苯二甲酸二异丁酯(DIBP)含量小于800ppm;

c 豁免材料中:铜合金中的铅含量小于38000ppm;


供应的所有物料均满足ROHS 2.0(修正指令EU 2015/863)要求并保证满足以下条款:

2.1样品承认阶段,供方需提交:有效期内的RoHS 2.0(修正指令EU 2015/863)第三方(SGS或CTI)测试报告(中、英文版)。


a  塑胶件第三方检测报告中必须包括:Pb、Cd、Hg、Cr6+、PBBs、PBDEs、DBP、BBP、DEHP、DIBP十项;

b  金属件第三方检测报告中必须包括:Pb、Cd、Hg、Cr6+、PBBs、PBDEs、DBP、BBP、DEHP、DIBP十项;

c  包装材料必须提供Pb、Cd、Hg、Cr6+、PBBs、PBDEs、DBP、BBP、DEHP、DIBP十项;

d  所有检测报告有效期为一年,若我方临时需要供方提供检测报告,供方应给予积极配合。